Eu - Declaration Of Conformity; Stihl Rme 443.0, Rme 443.0 C; Lawn Mower; Technical Specifications - Stihl RME 443 Manuel D'utilisation

The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a STIHL specialist
dealer.
17. EU - Declaration of
conformity

17.1 STIHL RME 443.0, RME 443.0 C

Lawn Mower

STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: electric lawn mower
– manufacturer's brand: STIHL
– type: RME 443.0, RME 443.0 C
– serial number: 6338
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 60335-1, EN 60335-2-
77, EN 55014-1, EN 55014-2, EN 61000-
3-2 and EN 61000-3-3 (where applicable).
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
D-90431 Nuremberg
0478 121 9921 A - EN
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix VIII.
– Measured sound power level: 94 dB(A)
– Guaranteed sound power level: 96
dB(A)
The technical documents are stored in the
Product Approval department at STIHL
Tirol GmbH.
The year of manufacture and machine
number are indicated on the lawn mower.
Langkampfen, 02.11.2020
STIHL Tirol GmbH
p.p.
Matthias Fleischer, Head of Research and
Development Division
p.p.
Sven Zimmermann, Head of Quality
Division

18. Technical specifications

RME 443.0 / RME 443.0 C:
Serial number 6338
Motor, design: Electric motor
type: Universal AC
electric motor
Voltage: 230 V~
Power input: 1500 W
Frequency: 50 Hz
Fuse: 7 A
Protection class: II
Type of protection: IPX 4
Cutting utilities: Cutter bars
Cutting width: 41 cm
Speed of cutting
utilities: 2,900 rpm
Cutter bar drive: Permanent
Tightening torque for
blade fastening
screw: 10 - 15 Nm
Wheel diameter
(front): 180 mm
Wheel diameter
(rear): 200 mm
Grass catcher box: 55 l
Cutting height: 25 - 75 mm
RME 443.0:
In accordance with Directive 2000/14/EC:
Guaranteed sound
power level L 96 dB(A)
WAd
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L 82 dB(A)
pA
Uncertainty K 2 dB(A)
pA
47