Cleaning & Maintenance - Silk-n Fresh Mode D'emploi

7. Cleaning & maintenance
Use warm water up to a maximum of 45ºC / 113ºF.
EN
7.1 Cleaning the brush heads
Clean the brush head after each use.
Switch the device off. Rinse with warm water and mild soap to remove any
U
build-up that may have accumulated. Then shake off any excess water.
Dry the brush and the brush head with a towel. You can also dry the
U
brush head by switching the device back on, and rubbing it against a
towel for 5-10 seconds.
We recommend you replace used brush heads every 3 months, or earlier if
Z
you see that they are worn.
C
Do not allow face wash to accumulate on the brush heads.
7.2 Cleaning the device and charging cradle
We recommend that you clean the device after each use, and the stand/charging
cradle once a month. Before cleaning:
Remove the device from the stand/charging cradle.
U
Disconnect the stand/charging cradle from the electricity supply.
U
Do not use abrasive cleaners or chemicals to clean any parts.
U
Clean the device or stand/charging cradle with a damp cloth using a
U
mild detergent, then wipe it dry with a clean cloth.
To remove any residue of face wash around the nipple, remove the brush
U
head, and wash the nipple and the surrounding area with warm water.
Then wipe it dry with a clean cloth.
C
Do not clean the device or any of its parts in the dishwasher.
12