Silk-n Fresh Mode D'emploi page 15

7.3 Cleaning the dispenser
It's important to clean the dispenser from time to time and not to leave face wash
in the dispenser for a long time without use. This is because it will dry up and
solidify. We recommend you clean the dispenser at least once a month, especially
if the device hasn't been used for some time, or won't be used regularly.
Fill the dispenser with warm water and close the dispenser lid. Shake
U
the device and then open the dispenser lid to let the warm water and
face wash residue run out. Repeat this until the dispenser is clean.
When you have filled the dispenser with warm water, press the
U
dispensing button a few times to clean the inside of the attachment
point.
After that, refill the dispenser with face wash.
U
7.4 Replacing the brush head
To remove the brush head, simply grip the outer plastic base of the brush
1.
head with one hand, and the device handle with the other, and pull
upwards until it snaps loose.
To attach a brush head, place the center of the brush head on the nipple.
2.
Gently press the brush head and push down until it clicks into place.
3.
7.5 Replacing the nipple
The nipple releases the face wash for use. You can replace the nipple if you see it
is damaged or worn.
Remove the brush head.
1.
Remove the old nipple and replace with a new one.
2.
Put the brush head back in place.
3.
13
EN