Cleaning And Maintenance - Silk-n Infinity H3102 Mode D'emploi

Keep Pulsing or Gliding until you have covered the target
11.
area.
a Try to avoid gaps or overlaps. Overlaps increase the likelihood of
adverse affects.
C
If your skin blisters or burns, stop use immediately.
12. When you have completed your treatment, long press the
control button, to switch off the device. Remember the last
energy setting you used because the device always starts up
at energy level 1.
Disconnect the adapter from the electricity supply, then
13.
clean the device and store safely (see section "9. Cleaning and
maintenance").
14. After your treatment session we recommend you apply a body
lotion to the treated area to help your skin recover from the
treatment faster.

9. Cleaning and maintenance

U Disconnect the device from the electricity supply.
To clean the device including the treatment surface, use a clean,
U
dry cloth and 70% alcohol. Never use acetone or other abrasive fluids,
because they will damage your device. Then use a wipe to dry the
device.
U After cleaning, we recommend you store the device in its original box
and keep it away from water.
C
Never immerse the device or any of its parts in water.
23
EN