After Treatment; Cleaning, Maintenance & Storage - Silk-n Motion H3220 Mode D'emploi

6.5 After treatment

When you have finished your treatment session:
EN
1. Long press the control button (#4) to switch off the device.
Remember the last energy level setting you used, because
it will not be restored when you turn the device on again.
2. Disconnect the adapter from the electricity supply, then
clean the device and store safely (see section 7. Cleaning,
maintenance & storage).
3. After your treatment session we recommend you apply a
body lotion to the treated area to help your skin recover
from the treatment faster.
7. Cleaning, maintenance & storage
It is important to clean the device after each treatment.
U
Disconnect the device from the electricity supply.
U
To clean the device including the treatment surface (#6),
wipe with a clean, dry cloth and 70% alcohol. Never use
acetone or other abrasive fluids, because they will damage
your device.
U
Use a wipe to dry the device.
U
After cleaning, we recommend you store the device in its
original box.
20