Dimensions; Installation Example; Assembly Instructions - Franke AQRE133 Notice De Montage Et De Mise En Service

8.

Dimensions

9.

Installation Example

10. Assembly Instructions

Warning!
Use the fitting only with non-return valves and the grit filters specified.
Failure to observe can result in an increased bacterial load in drinking water and
cause a health risk or even risk of death.
☞
Important!
Before installing, flush the pipes in compliance with DIN 1988.
☞
Do not shorten the connector hoses located at the fitting.
☞
Connect the fitting only to the original plug-in power supply. Connect the plug-in
power supply only to a socket carrying 230 V/50 Hz.
10.1 Install the fitting (a) on the washbasin (b).
☞
Important!
Observe the range settings when installing on a stainless steel washbasin
Chapter 13.
☞
The corner valves (c) must be provided by the customer.
10.2 Screw the connecting hose (d) on to the corner valve.
10.3 Insert the plug-in power supply into the socket.
10.4 Connect the line between the fitting and the power supply.
6
X Extension
cable
0.6 m without
3.6 m 3.0 m
10.6 m 10.0 m
info@hygiene-shop.eu - www.hygiene-shop.eu
FAR
Order No.
–
85-032.12.050
85-032.12.051