User Mode - Zanussi ZDT24003FA Notice D'utilisation

Programme
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (Also, it is a standard programme for test institutes).
3) The appliance senses the degree of soil and the quantity of items in the baskets to adjust the tempera-
ture and the quantity of the water and to control the energy consumption and the programme duration.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short period
of time.
SETTINGS
PROGRAMME SELECTION MODE
In the programme selection mode, it is possible to
set a washing programme and to enter the user
mode to change the appliance settings.
To enter the programme selection mode:
Press on/off button.
The indicator
If the control panel does not indicate that the
appliance is in the programme selection mode,
follow the CANCEL procedure.
CANCEL PROCEDURE
Use CANCEL to:
• Cancel a currently running programme.
• Stop the countdown of Delay option.
• Bring the appliance back to the programme
selection mode.
To CANCEL:
6
Degree of soil
Programme phases
Type of load
Heavy soil •
Crockery, cut- •
lery, pots and •
pans •
Fresh soil •
Crockery and
cutlery •
Normal or light •
soil •
Delicate crock- •
ery and glass-
ware
is on.
Duration
(min)
Pre-wash 155 -
Wash 70 °C 170
Rinses
Dry
Wash 60 °C 30
or 65 °C
Rinses
Wash 45 °C 75 - 85
Rinses
Dry
Press and hold simultaneously
until the control panel indicates the appliance
is in the programme selection mode.

USER MODE

The user mode allows changing the following
appliance settings:
• Adjust the level of the water softener according
to the water hardness.
• Activate or deactivate the acoustic signal
indicating the end of a programme.
• Activate or deactivate AirDry.
Before entering the user mode, make sure the
appliance is in the programme selection mode.
To enter the user mode:
Press and hold simultaneously
for at least 3 seconds.
Consumption values
1)
Energy
(kWh)
1.5 - 1.7
0.8
1.0 - 1.1
Water
(l)
14-15
10
13 - 14
and
and