Hints And Tips - Zanussi ZDT24003FA Notice D'utilisation

SETTING AND STARTING A PROGRAMME
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
Starting a programme
1. Open the appliance door and keep it ajar.
2. Press on/off to activate the appliance. Make
sure the appliance is in the programme
selection mode.
3. Select a programme from the control panel by
pushing a desired programme button.
A related programme indicator is on.
4. Close the appliance door to start the
programme.
The appliance starts working.
Starting programme with Delay option
Make sure the appliance is on and in the
programme selection mode.
1. Select a programme from the control panel.
A related programme indicator is on.
2. Press the button
start.
The indicator is on.
3. Continue pressing
countdown (3, 6 or 9 hours).
A related indicator on the control panel indicates
the countdown time.
4. Close the appliance door to start the
countdown.
The programme starts automatically when the
countdown is complete.

HINTS AND TIPS

GENERAL
The following hints will ensure optimal cleaning and
drying results in daily use and also help to protect
the environment.
• Remove larger residues of food from the dishes
into the waste bin.
• Do not pre-rinse dishes by hand. When needed,
use the prewash programme (if available) or
select a programme with a prewash phase.
• Always use the whole space of the baskets.
10
to delay the programme
to extend the
How to activate XtraDry
Press and hold simultaneously
indicator comes on.
If the option is not applicable to the program, the
related indicator does not come on or it flashes
quickly for a few seconds and then goes off.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration. After
closing the door, the appliance continues from the
point of interruption.
If the door is opened during the drying
phase, before AirDry automatically
opens it, the programme ends after 30
seconds.
If the door is closed after it is opened
automatically by AirDry in the drying
phase, the programme ends after 3
minutes.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it, as this may
cause damage to the appliance.
End of the programme
When the programme is completed the indicator
is on.
1. Press the on/off button or wait for the AUTO
OFF function to deactivate the appliance. If you
open the door before the activation of AUTO
OFF, the appliance is automatically
deactivated.
2. Close the water tap.
• When loading the appliance, make sure that the
dishes can be completely reached and washed
by the water released from the spray arm
nozzles. Make sure that items do not touch or
cover each other.
• You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
tablets (e.g. ''3in1'', ''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
• Select the programme according to the type of
load and degree of soil. With the ECO
and until the