Handling and operation
Kitchen timer
The appliance has a convenient kitchen timer with which, for example, cooking
and baking times can be monitored. The programmable time range of the kitchen
timer lies between 1 minute and 23 hours, 59 minutes.
Setting the kitchen timer
♦
Press the button Timer
indicator shows
kitchen timer is faded in.
♦
Using the buttons
button
desired running time for the kitchen timer. With each press on the button
the start time changes by one minute. Holding the button down for more
than 2 seconds starts the speed setting.
NOTICE
►
If, during the setting, approx. 15 seconds passes without any changes tak-
ing place, the appliance reverts back to the previous operational mode.
Starting the kitchen timer
♦
After setting the time, press the button Timer
the remote control, once again. The displayed time begins to run backwards.
In the display a backwards-running clock
NOTICE
►
If, during the operation of the kitchen timer, another function is selected, the
indicator of the remaining time is faded out. The cooking pot symbol
the backwards-running clock
Press the button Timer
again to display the remaining time for the kitchen timer for about 10 seconds.
30 seconds before the kitchen timer run time has expired the appliance begins to
acoustically indicate, with individual signal tones, the arrival of the set time. The
intervals between the individual tones will be ever shorter. When the set time has
elapsed, the alarm signal of the kitchen timer sounds as a continuous tone for a
maximum of 60 minutes.
♦
Press the button Timer
switch the alarm signal of the kitchen timer off .
SKRI 2000 A1
, or the button Timer
8
. In the display the cooking pot symbol
/ Up
17
and the
/ Down-button
42
or the button Timer
8
, or the button Timer
8
on the remote control. The
37
and
/ Down
, or the
i
i
19
on the remote control, set the
32
, or the button Timer
8
is blended in.
continue to be indicated in the display
on the remote control once
37
on the remote control, to
37
for the
/ Up-
GB
on
37
and
.
129