Specifications - BEAL NPMS17.5/117H Notice D'emploi

Product Specifications
Deck Size (inches / cm)
Height of Cut (inches / cm)
Transmission Type
Ground Speed – Fwd/Rev mph (kph)
Engine Power (hp)
Engine Displacement (cc)
Fuel Tank Capacity (gal / liters)
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance
with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating
performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived
at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by,
among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products
on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine
will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This
difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling,
carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and
engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of
higher rated power for this Series engine.
EBL175460
46 / 116,8
1.5 - 4.0 / 3,8 - 10,2
Hydro Drive
0 - 5.6 / 0 - 3.5 (0 - 9,0 / 0 - 5,6)
17.5
500
2.8 / 10.6

Specifications

37