General Information; Safety Information - Heidolph MR Hei-Mix S Mode D'emploi

E

GENERAL INFORMATION

Unpack your item carefully.
Inspect for damage and report such damage or missing parts to your supplier right away.
Read your Instruction Manual carefully. Take time to save time while working with your item.
Make sure that every user has read and understood the Instruction Manual.
Please store the Instruction Manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
MR Hei-Mix S models feature a non-detachable power cord without protective ground terminal
and with flat-type connector (EN 50075, type XVI 2.5 A 250 volts), protective class II.
When using the item in a country with deviating outlet / plug systems, we recommend to use
approved adapters or to have an electrician replace the standard plug with one suiting your
needs.

SAFETY INFORMATION

Please comply with all safety and accident-prevention regulations as in force for
laboratory work !
Use extra care when working with flammable substances; refer to safety data sheets.
When connecting your item with your local power supply, please make sure your item is
designed for your local voltage; go by data plate on the item.
Turn your power switch OFF whenever the item is not used, or before disconnecting the
plug.
Repair work is restricted to technicians approved by Heidolph Instruments.
Use extra care when working in the vicinity of flammable and explosive substances.
Motors are of non-sparking type, however, the item itself is not explosion proof
Your item requires a solid stand.
10