Maintenance Activities - Holmatro HSS 200 Mode D'emploi

EN
8.4 Maintenance materials
/i
Application
Steel parts
Hydraulic couplers
Hydraulic oil
Long term preservation
Skid pads
8.5 Maintenance schedule
This schedule is an average. Depending on the intensity of use of your equipment, Holmatro can
provide a specific maintenance schedule for you.
/i
Object
External steel parts
Complete system (including
hydraulic hoses, hydraulic
couplers, dust caps and
accessories)
Piston
1. Holmatro dealer maintenance.
8.6

Maintenance activities

8.6.1 General
• Check the operation of the system.
• Check the system for damage and leaks. If the system does not work properly and/or leaks, have it
repaired by a Holmatro certified technician.
8.6.2 Hydraulic couplers
• Check the couplers for damage. Have a Holmatro Certified Technician replace damaged couplers.
• Clean the coupler with luke warm water and a mild soap solution.
• Dry the couplers.
• Lubricate the end of the coupler with hydraulic oil or inject WD-40.
• Lubricate the locking ring by injecting WD-40 into the space between the back section and the
locking ring.
36
Type of maintenance material
WD-40 preservative oil
WD-40 preservative oil
ISO-L HV VG 15/36
Tectyl ML from Valvoline
Cleaning agent
Action
Apply preservative oil
Clean
Check for leakage and damage
Verify correct functioning
Lubricate moving parts
Check
916.001.096_005
Amount
As required
As required
As required
As required
Apply a thin coat on each
skid pad
Time interval
x
x
x
x
x
x
HSS 200