Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wireless Hand-held microphone
These instructions are intended for users without
any specific technical knowledge . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
All operating elements de scribed can be
found on the fold-out page 3 .
1 Overview
1.1 Fig. 1: Hand-held microphone
1 Microphone cartridge; to insert batteries, un-
screw the cartridge (figs . 2 to 4)
2 LC display; indicates the transmission fre-
quency and the charging status of the batter-
ies during operation
3 Cap for the control part; remove the cap for
operation (fig . 5)
4 Power switch
1.2 Figs. 2 to 4: Inserting batteries
(microphone cartridge unscrewed)
5 4-pole contact, each on the microphone car-
tridge (fig . 2) and on the handle (fig . 3); prior
to assembling microphone cartridge and han-
dle, fit the contacts together
6 Lock for the battery holder (7);
to unlock the holder, press the lock in arrow
direction backwards
7 Battery holder for two 1 .5 V batteries of size
AA (R6)
1.3 Fig. 5: Control part
8 Key SET
with the unit not locked:
for calling up and exiting the adjusting
modes for frequency / sensitivity / lock func-
tion
☞
chapters 5 .1, 5 .2 and 5 .3 .1
with the unit locked:
for calling up and exiting the adjusting
mode for the lock function
☞
chapter 5 .3 .2
9 Key for reducing the frequency (in the fre-
quency adjusting mode) or the sensitivity (in
the sensitivity adjusting mode) and for deac-
tivating the lock function (in the lock mode)
10 Key for increasing the frequency (in the
frequency adjusting mode) or the sensitivity
(in the sensitivity adjusting mode) and for ac-
tivating the lock function (in the lock mode)
(cap removed )
2 Important Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
•
The unit is suitable for indoor use only . Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range 0 – 40 °C) .
•
For cleaning only use a dry, soft cloth, never
use chemicals or water .
•
No guarantee claims for the unit and no lia-
bility for any resulting personal damage or
material damage will be accepted if the unit is
used for other purposes than originally intend-
ed, if it is not correctly operated or if it is not
re paired in an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
3 Applications
In combination with the multifrequency re ceiver
TXS-875 from IMG STAGELINE, this dynamic
hand-held microphone with integrated multi-
frequency transmitter makes up a wireless audio
transmission system . Within the UHF frequency
range of 518 – 542 MHz, the transmission fre-
quency can be selected as desired (frequency
spacing 125 kHz) .
The microphone is supplied with a micro-
phone case, a microphone holder and 7 plastic
push-on caps of different colours .
3.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL declare
that the wireless microphone TXS-875HT com-
plies with the directive 2014 / 53 / EU . The EU dec-
laration of conformity is available on the Internet:
www .img-stageline .com
Restrictions or requirements apply in the fol-
lowing countries:
CZ
DE
IT
In the Federal Republic of Germany, the wireless
microphone requires a frequency assignment
(for which a fee is charged) . In other countries, it
is necessary to apply for a corresponding approv-
al . Prior to operating the unit outside Germany,
please contact the MONACOR subsidiary or the
.
EL
FI
LT
MT
PL
FR
7
Publicité
Table des Matières
