Care And Maintenance - HQ Power HQMX11009 Mode D'emploi

13. Cue Channel 1
Select the signal output and monitor the music by headphones.
14. Cue Channel 2
Select the signal output and monitor the music by headphones.
15. MIC Level
Adjust the microphone volume level.
16. Crossfader
Mix the signal of one channel with the signal of the other. If the crossfader is on the
centre position, both channels can be heard.
17. Phones Level
Adjust the headphones volume level.
18. Parameter Display
19. Time
Activate this parameter to adjust the time value of the effect with the jog wheel.
20. Ratio
Activate this parameter to adjust the mix ratio, resonance, or feedback of the effect
with the jog wheel.
21. Bypass
Press this button to activate/cancel the DJ effects. Effects are selectable with the
effect selector.
22. Effect Selector
23. Jog Wheel
Turn this wheel to select the desired item.
24. Headphone Socket
Connection for your headphone.
25. MIC Input
Connection for your microphone with ¼" jack.
26. Channel 1 Input
RCA connectors for channel 1. Connect a turntable, rhythm machine or sampler to
the phono socket, connect a CD/MP3 player to the line socket.
27. Channel 2 Input
RCA connectors for channel 2. Connect a turntable, rhythm machine or sampler to
the phono socket, connect a CD/MP3 player to the line socket.
28. Master Output
RCA connection to the main amplifier.
29. DC Connection
Plug the adapter into this input.
30. BT Antenna
Connection for an antenna.
6.

Care and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the appliance from the mains.
2. Let the appliance cool down.
Cleaning
•
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with a
soap and water solution. Do not immerse or submerge any part of the appliance in
water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
V. 01 – 03/12/2020
HQMX11009
7 ©Velleman nv