General Guidelines - HQ Power HQMX11009 Mode D'emploi

3.

General Guidelines

•
Refer to the Velleman
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4. Installation
•
Install the device in a clean and dry environment.
•
Before connecting the device to the power supply, fully turn down all the knobs and
faders to minimum, except for the channel EQ and pan controls, which should be
centred. Also, make sure all buttons are in the out position.
•
Next, connect all necessary cables, input devices (microphones...) and output
devices (amplifier, speakers...).
5. Description
1. Mode
Press this button to select the input source.
2. >||
Play or pause the selected track.
3. |<<
Select the previous track.
4. >>|
Select the next track.
5. Display
6. USB Input
Input socket for a USB stick.
7. Line/USB Input Selector
Press to select the line or USB input.
8. MIC Talkover Button
Press this button to lower the level of the input source.
9. Power LED
10. Fader Channel 1
Adjust the level of channel 1.
11. VU Meter
Indicates the level of the left and right master channels.
12. Fader Channel 2
Adjust the level of channel 2.
V. 01 – 03/12/2020
HQMX11009
®
Service and Quality Warranty on the last pages of this
6 ©Velleman nv