Connection Of Additional Control Devices; Compatibility With Roco And Fleischmann Components - Roco z21start Manuel D'utilisation

2.1 Connection of Additional Control Devices

In addition to the multiMAUS, you will probably want to control your z21 digital system with your
smartphone* or your tablet*. But if you want to share control with others or do not have your smart-
phone at hand, you can also connect your current multiMAUS or local mouse control devices to the
21start
X BUS sockets of the
z
Each of these control devices can interface with all locos and digital components. This allows control-
ling at any time locos controlled by other devices by selecting any function of the corresponding loco
or the loco controller from your Z21 mobile app*.

2.2 Compatibility with Roco and Fleischmann Components

21
The start-digital centre can be connected without problem to all Roco and Fleischmann digital
z
devices, based on the RocoNet or the X-BUS protocol. These include:
▶ multiMAUS, Lokmaus 2 and Lokmaus R3 (Art. No.10810, 10760, 10790, 10860 and 10792)
▶ Keyboard (Art. No. 10770) and RouteControl (Art. No. 10772)
▶ Roco booster (not RailCom
▶ For further information on compatibility, see online www.Z21.eu.
8051282921.indd 39
Digital Centre.
© compatible, Art. No. 10762 and 10765)
Digital Centre
Warning: Positively do not con-
nect an analogue transformer to
the power circuit of your digital
system! Destruction of the
21
start digital centre would be
z
the result!
39
21.04.2016 11:44:19