Fitting The Unit Door - V-ZUG Komfort 60i Notice D'installation

Fig. 23
u If affixing the unit under a worktop, use 2 screws to secure
the fixing bracket under the worktop.
Fig. 24
u If attaching the unit at the side, screw the fixing bracket into
the recess with one screw on each side.

9.2 Fitting the unit door

u Fit the handle on the unit door.
u Check 8 mm presetting. (Distance between appliance door
and lower edge of crosspiece)
Fig. 25 (12) to unit door height.
u Push up assembly aids
Lower edge ▲of the assembly aid = top edge of the unit
door to be fitted.
u Unscrew fastening crosspiece
Fig. 25 (10) .
locknuts
* Depending on model and options
Fig. 25
Fig. 25 (11) by undoing the
u Attach fastening crosspiece
unit door using the assembly aids
Fig. 26 (11) in the middle of the door.
u Align the crosspiece
w Distances to the outer edge are equal at the left and right.
For chipboard doors:
u Secure the fastening crosspiece
Fig. 26 (19) .
screws
For frame and panel doors:
u Secure the fastening crosspiece
Fig. 26 (19) at the edge.
Fig. 26 (12) for removal, turn them
u Raise the assembly aids
and insert them into the adjacent openings.
u Attach the unit door to the adjusting bolts
Fig. 27 (10) onto them.
loosely screw the locknuts
u Close the door.
u Check the gap between the door and the surrounding unit
doors.
u To laterally align the door: push unit door in X direction.
u To align the door vertically Y and in the lateral inclination:
adjust adjusting bolts Fig. 27 (13) with a screwdriver.
w The unit door is flush and in alignment with the surrounding
unit fronts.
Fig. 27 (10) .
u Tighten locknuts
u To screw the unit door to the appliance door:
u Drill pilot holes in the door of the unit (possibly make prelimi-
nary holes with a bradawl).
u Screw the appliance door to the cabinet door using the fixing
bracket.
Installation
Fig. 26
Fig. 26 (11) to the inside of the
Fig. 26 (12) .
Fig. 26 (11) with at least 6
Fig. 26 (11) with 4 screws
Fig. 27
Fig. 27 (13) and
Fig. 28
37