Controls And Displays; Operating And Control Elements; Temperature Display; Putting Into Operation - V-ZUG Ideal 60i Mode D'emploi

Masquer les pouces Voir aussi pour Ideal 60i:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Controls and displays

closed containers. Any alcohol that leaks out
may be ignited by electrical components.
Danger of tipping and falling:
Do not misuse the plinth, drawers, doors etc.
-
as a step or for support. This applies particu-
larly to children.
Danger of food poisoning:
Do not consume food which has been stored
-
too long.
Danger of frostbite, numbness and pain:
Avoid lasting skin contact with cold surfaces
-
or refrigerated/frozen food or take protective
steps, e.g. wear gloves. Do not consume ice
cream, water ice or ice cubes immediately
and do not consume them too cold.
Danger of injury and damage:
Hot steam can lead to injury. Do not use elec-
-
trical heating or steam cleaning equipment,
open flames or defrosting sprays to defrost.
Do not use sharp implements to remove the
-
ice.
Danger of crushing:
Do not hold the hinge when opening and
-
closing the door. Fingers may get caught.
Symbols on the appliance:
The
symbol
compressor. It refers to the oil in the
compressor and indicates the following
danger: Swallowing or inhaling can be fatal.
This is only relevant for recycling. There is no
danger in normal operation.
A sticker to this effect may be applied to the
rear of the appliance. It refers to the foam-
padded panels in the door and/or the
housing. This is only relevant for recycling. Do
not remove the sticker.
Please observe the specific information in
the other sections:
DANGER
identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING
identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION
identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE
identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note
identifies useful information and tips.
28
can
be
located
on
the
3 Controls and displays

3.1 Operating and control elements

Fig. 2
(1) On/Off button
(2) Quick Cool button
(3) Settings button

(4) Temperature display

3.2 Temperature display
During normal operation, the display shows:
-
the chiller temperature setting
The temperature display flashes if/when:
-
You change the temperature setting
The following displays indicate a fault. Possible causes and
solutions: (see 7) .
-
to
F0
F9

4 Putting into operation

4.1 Switching on the appliance

u Open the door.
u Press the On/Off button
w The temperature display lights up. The interior
light goes on when the door is opened. The appli-
ance is switched on.
w If "DEMO" is displayed, demo mode is activated.
Please contact the after sales service.

5 Control

5.1 Child proofing

The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.

5.1.1 Setting the child lock

To activate the setting mode:
u Press the Quick Cool button
w The Menu symbol is shown on the display,
flashes on the display.
w
c
To switch on the function:
* Depending on model and options
(5) Menu symbol
(6) Quick Cool symbol
(7) Child lock symbol
Fig. 2 (1) .
Fig. 2 (2) for around 5 seconds.
Fig. 2 (5) .

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

51090

Table des Matières