Wi-Fi Access Point Configuration; Connecting To The Access Point; Editing The Access Point - MVG NeptuLink Manuel Utilisateur

Wi-Fi Access Point configura-
tion

CONNECTING TO THE ACCESS POINT

Follow the steps below to connect to a Wi-
Fi access point.
➊
Activate your device's Wi-Fi connection.
➋
Click the network named NeptuLink-4G.
A password may be required for net-
work access.
Once connected, you can access Internet
without using the Ethernet cable.
You can also use your smartphone to
access your device's web configuration
interface.

EDITING THE ACCESS POINT

Follow the steps below to edit the Wi-Fi ac-
cess point.
Disconnect from 4G if it is active (Net-
work/Interfaces tab and
button for 4g-NeptuLink).
➊
Click the Network/WiFi Network tab on the
upper band.
➋
Click Edit to display the Wi-Fi access point's
connection settings.
➌
A settings box is displayed:
From this box, you can change the follow-
ing:
•
Communications channel.
Channel 6 is the default channel.
EN
Disconnect
15