Disconnecting From A Wi-Fi Network; Editing A Wi-Fi Connection; Deleting A Wi-Fi Connection - MVG NeptuLink Manuel Utilisateur

➎
Then click Submit. A box containing net-
work connection information is displayed.
➏
Click Save & Apply to save and apply the
settings.
➐
Test your Internet connection.
Click the Status/Overview tab, then check
that the Active Connection status appears as
shown below:
Your terminal is now configured to allow your
computer to access the Internet.
To access Internet from a computer connected
to your terminal, launch a web browser such
as Microsoft Edge or Google Chrome. The
browser should display a web page.
DISCONNECTING
FROM A Wi-Fi NETWORK
Follow the steps below to disconnect from
a Wi-Fi network.
When the Wi-Fi network is no longer
in range, you are automatically
disconnected.
14
➊
Click the Network/Wi-Fi Network tab on the
upper band.
➋
Click Disable to disconnect from the Wi-Fi
network, as shown below.
➌
A confirmation box is displayed. Click OK
to confirm.

EDITING A Wi-Fi CONNECTION

Follow the steps below to edit an existing
Wi-Fi connection.
➊
Click the Network/WiFi Network tab on the
upper band.
➋
Click Edit to display the Wi-Fi network's
connection settings.
➌
Change the settings as required, then click
Save & Apply to save and apply the new
settings.

DELETING A Wi-Fi CONNECTION

Follow the steps below to delete an existing
Wi-Fi connection.
➊
Click the Network/WiFi Network tab on the
upper band.
➋
Click Remove to delete the Wi-Fi network
connection.
➌
A confirmation box is displayed. Click OK
to confirm.
Deleting a Wi-Fi connection will reset the
Wi-Fi access point of the terminal.