4G Configuration - MVG NeptuLink Manuel Utilisateur

4G CONFIGURATION

➍
When the welcome page appears, click the
Network/Interfaces tab.
➎
Click Edit to edit the NeptuLink interface.
You are now ready to configure your ter-
minal for connection to the Internet.
In the "General" tab, use the SIM Selection
drop-down list to switch from one of the two
SIM cards to the other.
➏
For each SIM card, enter your telephone
service provider's APN as well as the SIM
card's PIN code in the correct tab (SIM 1 and
SIM 2 tabs).
If you enter an incorrect PIN code three
times, the SIM card will be blocked. If
this happens, contact your service
provider to obtain a PUK (PIN Unblock-
ing Key) code.
➐
Click Save & Apply to save and apply the
settings.
➑
Test your Internet connection.
Click the Status/Overview tab, then check
that the connection status appears as shown
below:
Your terminal is now configured to allow
your computer to access the Internet. Your
terminal will automatically establish an In-
ternet connection when your computer re-
quires access.
To access Internet from a computer con-
nected to your terminal, launch a web
browser such as Microsoft Edge or Google
Chrome. The browser should display a
web page.
EN
11