Advanced Configuration; Wi-Fi Configuration; Connecting To A Wi-Fi Network - MVG NeptuLink Manuel Utilisateur

ADVANCED CONFIGURATION

Click the Advanced Settings tab for the ad-
vanced settings (repeat steps
necessary to return to the Common Configu-
ration interface).
Enable Roaming 2 : use this option to configure
the terminal for using data connections when
you change to a different country.
Depending on your subscription package,
sending or receiving data outside your
service provider's coverage zone may
incur additional costs.
Contact your service provider for further
information.
Enable PIN Protection: activates or deac-
tivates the PIN code protection function. If
the box is checked, you will need to re-enter
the PIN code for your SIM card.
(2) Roaming: this service allows you to connect trans-
parently to a mobile network in a foreign country when
you travel beyond your service provider's coverage area.

Wi-Fi configuration

CONNECTING TO A Wi-Fi NETWORK

➍ ➎
and if
Follow the steps below to connect to a Wi-
Fi network.
➊
Click the Network/WiFi Network tab on the
upper band.
➋
Click Scan to detect nearby Wi-Fi networks.
A list of available networks is displayed.
➌
To join a network, click the Join Network
button for the network you want to access.
➍
A settings box is displayed:
Type the Wi-Fi network's connection key in the
Passphrase field.
Disconnect from 4G if it is active (Net-
work/Interfaces tab and Disconnect
button for 4g-NeptuLink).
This may take a few seconds to complete.
To display the key, click on
Entering a wrong password requires you
to restart the operation.
Entering a wrong password resets the
access point of the terminal.
EN
13