Switching Off The Terminal; Configuring The Terminal - MVG NeptuLink Manuel Utilisateur

Ensure that the Ethernet connection
terminal block is fully screwed in.
Do not twist or damage the Ethernet
cable.
Do not use damaged Ethernet cables
or plugs.
Do not use the standard power cord.
➍
Connect the Data port on your PoE injec-
tor to the Ethernet port on your computer
or router.
➎
Switch on your PoE injector.

SWITCHING OFF THE TERMINAL

To switch off the terminal
•
Standard configuration: unplug the power
cord by unscrewing the screws on the 2-
point terminal block.
•
PoE configuration: switch off the PoE injec-
tor by unplugging its power cord.
10

CONFIGURING THE TERMINAL

Follow the instructions below to configure
and test the 4G connectivity.
Your computer must be configured for
DHCP. For instructions on DHCP configura-
tion, please refer to your computer docu-
mentation or see the Appendix
your computer for DHCP
➊
Switch your computer on if it is off.
The terminal will automatically assign an
IP address to your computer.
➋
Type the URL http://192.168.1.1
address field of a browser such as Mi-
crosoft Internet
Chrome or Mozilla Firefox.
➌
The following login box will appear:
Type in admin as the user name and admin
as the password, all in lower case.
Click the login button to proceed to the ter-
minal's administration interface.
You can configure your terminal to connect
to Internet through a 4G or Wi-Fi connec-
tion.
"
Configuring
"
.
into the
Explorer, Google