Adjusting The Speaker Volume - Sony TA-VE810G Mode D'emploi

Adjusting the Speaker Volume

To enjoy Dolby Pro Logic Surround sound, select the
appropriate centre mode. Then adjust the volume of
each speaker using the test tone that the amplifier
provides. The test tone feature lets you set the volume
of your speakers to the same level. (If all of your
speakers have equal performance, you do not have to
adjust the speaker volume.)
Using the remote lets you adjust the volume level from
your listening position.
1
Click SOUND in the main menu.
2
Click PRO LOGIC, then click SUR.
FUNCTION SOUND
PRO LOGIC
MOVIE
MUSIC
MODE PRO LOGIC
SOUND FIELD
BASS BOOST
DIRECT PASS
TONE
3
Click C MODE repeatedly to display the centre
mode appropriate for your speaker system (see
page 18).
SURROUND EDIT
CENTER : 0 dB
WOOFER
NORMAL
REAR : 0 dB
RETURN STANDARD
SETUP
SPORTS
GAME
O N OFF
O N OFF
O N OFF
SUR EXIT
+
LEVEL
–
DELAY
C MODE
TEST
+
–
EXIT
Dolby Pro Logic Surround Setup
4
Click TEST.
You will hear a test tone from the speakers in the
following order. The speaker emitting the test
tone is shown in red on the SURROUND EDIT
menu.
WIDE, NORMAL: Front (left) n Centre n
Front (right) n Rear
PHANTOM: Front (left and right) n Rear
3CH LOGIC: Front (left) n Centre n Front (right)
SURROUND EDIT
CENTER : 0 dB
WOOFER
NORMAL
REAR : 0 dB
RETURN STANDARD
5
Adjust the volume levels so that you hear the test
tone from each speaker at the same volume level
when you are in your listening position:
• Click CENTER + or – to adjust the level of the
centre speaker from –15.0 dB to +10.0 dB (1
dB/steps).
During this adjustment, the test tone is emitted
from the centre speaker.
• Click REAR + or – to adjust the level of the rear
speakers from –15.0 dB to +10.0 dB (1 dB/
steps).
During this adjustment, the test tone is emitted
from both speakers simultaneously.
6
Click TEST when you are done adjusting.
The test tone is turned off.
To return to the main menu
Click EXIT.
To return to a previous menu
Click RETURN.
z
You can adjust all speakers at one time
Use VOL +/– on the remote.
z
You can increase the output level of the rear
speakers
You can raise the output of the rear speakers by 5 dB.
When turning on the receiver, press POWER and
MODE simultaneously to display "GAIN UP". To
return the output level to normal, repeat this procedure
to display "GAIN NORMAL".
+
LEVEL
–
DELAY
C MODE
TEST
+
–
EXIT
GB
19