Sony TA-VE810G Mode D'emploi page 2

WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
This amplifier incorporates the
Dolby* Pro Logic Surround system.
* Manufactured under license from
Dolby Laboratories Licensing
Corporation. DOLBY, the double-D
symbol a, "AC-3" and
"PRO LOGIC" are trademarks of
Dolby Laboratories Licensing
Corporation.
2 GB
Precautions
On safety
• Should any solid object or liquid fall
into the cabinet, unplug the amplifier
and have it checked by qualified
personnel before operating it any
further.
On power sources
• Before operating the amplifier, check
that the operating voltage is identical
with your local power supply. The
operating voltage is indicated on the
nameplate at the rear of the amplifier.
• This unit is not disconnected from the
AC power source (mains) as long as it
is connected to the wall outlet, even if
the unit itself has been turned off.
• If you are not going to use the
amplifier for a long time, be sure to
disconnect the amplifier from the wall
outlet. To disconnect the mains lead,
grasp the plug itself; never pull the
cord.
• AC power cord must be changed only
at the qualified service shop.
On placement
• Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
• Place the amplifier in a location with
adequate ventilation to prevent heat
buildup and prolong the life of the
amplifier.
• Do not place the amplifier near heat
sources, or in a place subject to direct
sunlight, excessive dust or mechanical
shock.
• Do not place anything on top of the
cabinet that might block the
ventilation holes and cause
malfunctions.
On operation
• Before connecting other components,
be sure to turn off and unplug the
amplifier.
On cleaning
• Clean the cabinet, panel and controls
with a soft cloth slightly moistened
with a mild detergent solution. Do not
use any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
If you have any question or problem
concerning your amplifier, please
consult your nearest Sony dealer.
About This Manual
This manual is divided into three
sections; Getting Started, On-screen
Operations and Front Panel
Operations.
The "Getting Started" section
describes connections, how to set up
the remote for on-screen control, and
Dolby Pro Logic Surround.
The "On-Screen Operations" section
describes how to operate the
amplifier using the remote to
manipulate the on-screen display on
your TV screen. The remote lets you
perform almost all of the amplifier
operations.
You can also control the amplifier
without the remote. The "Front
Panel Operations" section describes
how to operate the amplifier using
the front panel controls and remote
short-cut buttons.
The following icon is used in this
manual:
Indicates hints and tips for
z
making the task easier.