WIKA TR10-0 Mode D'emploi page 11

5. Commissioning, operation
Model TC10-0
Single thermocouple
5.2.2 Connection to built-in transmitter
For the electrical specifications (e.g. connection diagrams, tolerance values, etc.) please
refer to the relevant operating instructions and/or data sheet for the built-in head-mounted
transmitter.
Junction between cable and appropriate conduit/sealing fitting:
Screw the male nut tightly into the adapter (use appropriate tools!)
During installation, take care to
Avoid distorting the cable sheath when tightening the male nut.
■
Avoid cutting too deep into the cable sheath.
■
Use suitable cable/conduit.
■
Be careful of the clamping zone of the conduit/sealing fitting.
■
Refer to NEC/CEC for additional information.
WIKA operating instructions models TR10-0, TC10-0 (FM, CSA)
The colour coding at
the positive poles of the
instrument decides the
correlation of polarity
and terminal.
Dual thermocouple
EN
11