Toto EcoPower TET1GAR Manuel D'installation Et D'utilisation page 15

DETECTION RANGE
The detection range of the infrared sensor is set at the factory and does not need
further adjustment.
TET1GAR, TET1LA(R)(X), TET1UA(R)(X)
TEU1GAR, TEU1UA(R)(X)
TEU1LA(R)(X)
Max 19-11/16"
(Max 500mm)
PRECAUTION
DO NOT place the infrared sensor
of one Flush Valve so that it is in
line with the sensor of another
Flush Valve sensor.
Another infrared sensor.
Infrared sensor of the automatic
Flush Valve.
NOTE: In some cases, the valve may not
detect a user if the toilet seat is left
in an upright position. This can be
due to the rough-in dimension or
gap of the open front commercial
seat. Please lower the seat or
arrange with a TOTO or other
plumbing contractor to change the
height of the valve.
The sensor can have trouble
detecting users wearing black
clothes in some conditions.
TET6LA(R)(X), TET6UA(R)(X)
TET6GAR
15°
PRECAUTION
DO NOT place the infrared sensor in
front of a mirror, stainless steel wall,
or other highly reflective surface.
Mirror, stainless steel wall or other
highly reflective surface.
Infrared sensor of the automatic
Flush Valve.
15
20°
Max 21-1/4"
(Max 550mm)
Control stop
Use chrome plated
elbow to adjust the
height of TOTO
EcoPower Flush
Valve from the
fixture.
Elbow
Wall flange