Installing The Steering Remote Control; Parts Supplied; Loading The Battery - Pioneer AVIC-88DVD Manuel D'installation

Masquer les pouces Voir aussi pour AVIC-88DVD:

Table des Matières

Les langues disponibles

Installation

Installing the Steering remote control

Steering remote control

Remove the battery cover, and insert a lithium (CR2032, 3V) battery. For details, see

"Hardware Manual".

• Avoid installing the remote control in such a location where the operation of safety devices such as airbags

is prevented by the remote control. Otherwise, there is a danger of a fatal accident.

• Avoid installing the remote control in such a location where the operation of the steering wheel and the

gearshift lever may be prevented. Otherwise, it may result in a traffic accident.

• Installation of the remote control requires specialized skills and experience. Installation of the remote con-

trol should be entrusted to a dealer from whom you purchased this unit.

• Install the remote control using only the parts supplied with this unit. If other parts are used, the remote con-

trol may be damaged or could dismount itself, which leads to an accident or trouble.

• Install the remote control as required by this manual. Failure to do so may cause an accident.

• Do not install the remote control near the doors where rainwater is likely to be spilled on the unit. Incursion

of water into the unit may cause smoke or fire.

• Fix the remote control securely to the steering wheel with the belt attached to the unit. If the remote control

is loose, it disturbs driving stability, which may result in a traffic accident.

• Do not attach the remote control to the outer circumference of the steering wheel. Otherwise, it disturbs dri-

ving stability, causing a traffic accident. Always attach the remote control to the inner circumference of the

steering wheel as shown.

Lithium battery

(CR2032, 3 V)

Holder

Belt

(2 pcs.)

Table des Matières

Table des Matières