Installing The Steering Remote Control; Parts Supplied; Loading The Battery - Pioneer AVIC-900DVD Manuel D'installation

Installing the steering remote control

Parts supplied

Steering remote control
Belt

Loading the battery

Remove the battery cover, and insert a lithium (CR2032, 3V) battery. For details, see
"Hardware Manual".
WARNING
• Avoid installing this unit in such a location where the operation of safety devices such as airbags is prevent-
ed by this unit. Otherwise, there is a danger of a fatal accident.
• Avoid installing this unit in such a location where the operation of the steering wheel and the gearshift lever
may be prevented. Otherwise, it may result in a traffic accident.
CAUTION
• Installation of this unit requires specialized skills and experience. Installation of this unit should be entrusted
to a dealer from whom you purchased this unit.
• Install this unit using only the parts supplied with this unit. If other parts are used, this unit may be damaged
or could dismount itself, which leads to an accident or trouble.
• Install this unit as required by this manual. Failure to do so may cause an accident.
• Do not install this unit near the doors where rainwater is likely to be spilled on the unit. Incursion of water
into the unit may cause smoke or fire.
WARNING
• Fix this unit securely to the steering wheel with the belt attached to the unit. If this unit is loose, it disturbs
driving stability, which may result in a traffic accident.
• Do not attach this unit to the outer circumference of the steering wheel. Otherwise, it disturbs driving stabili-
ty, causing a traffic accident. Always attach this unit to the inner circumference of the steering wheel as
shown.
Lithium battery
(CR2032, 3 V)
Screw
Outer holder
Hexagonal wrench
Inner holder
22