Connecting To The Display With 26-Pin - Pioneer AVIC-88DVD Manuel D'installation

Connecting the system
Connecting to the display with 26-pin input (e. g. AVH-P6600DVD, AVX-P8DVD, etc.)
This product
Black
(e.g. AVH-P6600DVD, AVH-P7500DVD,
AVH-P6500DVD, AVD-W6210, AVX-P8DVD)
Yellow
There may be no voice guidance depending on a com-
bined display unit. In that case, an external speaker
(commercially available) must be connected to the SP-
OUT jack (3.5 ø MINI JACK, 1 W max [8 Ω]) on this
unit's back.
When combining multi-channel processors, Pioneer
external speaker must be connected to the SP-OUT jack
on the navigation's back. If your display has the GUIDE
Not used.
SP OUT jack that can output the voice guidance, con-
nect the external speaker to the display.
Power cord
☞
See pages 9-11.
26-pin cable (supplied)
Display Unit
Microphone
☞
See page 27.
GPS antenna
☞
See page 22.
6m (19ft 8in.)
When resetting AV Head Unit or AV
system display
When pressing the reset button of AV Head
Unit or AV system display while Navigation
System and AV Head Unit or AV system dis-
play (AVH-P7500DVD, AVH-P6500DVD,
AVH-P6600DVD, AVX-P8DVD) are com-
bined, make sure that ACC is turned OFF. If
the reset button is pressed while ACC is ON,
it may not work properly.
8