Using The Remote Control - Pioneer SUPER TUNER III D DEH-P6800MP Mode D'emploi

Section
01 Before You Start
! When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions rules that
apply in your country/area.

Using the remote control

Point the remote control in the direction of the
front panel to operate.
! The remote control may not function prop-
erly in direct sunlight.
Important
! Do not store the remote control in high tem-
peratures or direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
FUNCTION button and AUDIO button
You can also select the desired mode by
FUNCTION button and AUDIO button on the
remote control. But operation of FUNCTION
button and AUDIO button on the remote con-
trol differs from the operation of
MULTI-CONTROL on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION button operation
% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch be-
tween the following modes:
Play mode (repeat play)Random mode
(random play)Scan mode (scan play)
Pause (pause)Compression (compres-
sion and BMX)Search mode (search meth-
od)TitleInput "A" (disc title input)
10
En
Note
Refer to Introduction of advanced built-in CD
player operation on page 19.
AUDIO button operation
% Press AUDIO to select the desired
mode.
Press AUDIO repeatedly to switch between
the following modes:
Fader (balance adjustment)Powerful (gra-
phic equalizer adjustment)50Hz (7-band
graphic equalizer adjustment)LOUD (loud-
ness)Sub W.1 (subwoofer on/off setting)
Sub W.2 (subwoofer setting)Bass (bass
boost)HPF (high pass filter)SLA (source
level adjustment)
Note
Refer to Introduction of audio adjustments on
page 55.