SilverCrest SGW 860 A1 Mode D'emploi page 84

 Clean the outside of the appliance with mild detergent
using a damp cloth.
NOTICE!
Possibility of damage to the appliance!
Risk of damage to the appliance due to moisture in the ap-
pliance.
 Clean the appliance door with a slightly damp cloth.
 Make sure that no moisture penetrates into the electronics
of the door lock so as not to damage the appliance.
 To protect the control panel, make sure that no moisture
comes into contact with the electronics.
 Do not use spray cleaner.
NOTICE!
Possible material damage!
Material damage is possible in the event of water leakage.
 Turn off the water supply before cleaning or empty the
water tank (see "1 1.1. Draining water manually" on
page 82).
 Remove the spray arm (4) inside the appliance (see Fig. U) to clean it. Lift this slightly
and remove it. Clean the spray arm under running water and check that the openings
are not blocked. Reinstall it again afterwards.
 In case of grease deposits, run the intensive program without a load to clean the inte-
rior.
84 - English
Fig. U