Connection To Power Supply; Preparations For Use; Opening The Door; Closing The Door - SilverCrest SGW 860 A1 Mode D'emploi

 Use, e.g., a retaining bracket or hose guide with suction cup (supplied) to hang the
drain hose to ensure that the drain hose is firmly attached.

8.5. Connection to power supply

 Once you have connected the dishwasher to the water supply and drainage, connect
the mains plug (20) to a power socket.
 The power socket must be easily accessible so you can unplug the appliance from the
mains quickly if necessary.

9. Preparations for use

9.1. Opening the door

 Hold the recessed grip (1) and open the door by pulling it towards you. Open the
door out fully (see Fig. K).
If the door is opened during operation the wash cycle will automatically be interrupted.

9.2. Closing the door

 Push the dish rack (7) fully into the appliance.
 Press on the door until you hear it lock into place.

9.3. Adding salt to the appliance

Dishwasher salt (regeneration salt) is used to harden water from a water hardness of 1-2
"medium".
 It is advisable to add dishwasher salt.
Fig. K
English -69