Filling With Water Manually; Connecting The Water Outlet - SilverCrest SGW 860 A1 Mode D'emploi

8.3. Filling with water manually

Before adding water, press the
As an alternative to using the water supply via a water tap, you can also fill
up the appliance with water manually (see Fig. E).
It is always necessary to fill up the appliance as soon as the acoustic signal sounds.
 Fill the measuring container (6) with clean tap water.
 Remove the water tank cover (12).
 Fill the water tank with water (min./max. 5 litres). Take care to pour the water into the
water tank opening slowly and carefully to avoid splashing.
An acoustic signal will sound as soon as the water tank is full.
 Put on the water tank cover.

8.4. Connecting the water outlet

Insert the drain hose with the connection for the water outlet (22) to the back of the appli-
ance and secure it using a clamp (see Fig. F).
You can connect the outlet hose in different ways:
− connect the hose to a special connection on the outlet pipe,
− feed the hose into an outlet pipe,
− or run into a sink/container.
8.4.1. Connecting the hose with the siphon on the sink
 Connect the drain hose with the outlet pipe siphon (for washing machines) underneath
the sink (see Fig. G). Ensure that the drain hose is inclined sufficiently. The appliance is
to be positioned at least 4 cm higher than the drain.
In case of connection to a siphon, an adapter is required for the connection to
the drain hose depending on the siphon design. This is available from special-
ist retailers.
button (18) to switch on the dishwasher.
Fig. H
English -67