Operation; Service; Accessories - Dustcontrol DC 3800 TR S Notice Originale

Operation

Connect the machine to compressed air. Th e pressure and
quantity of the air system has to be enough to run the
machine. Please see - Technical Data.
Th e fi lter should be cleaned 1-2 times per day with conti-
nuous running.
Reverse pulse fi lter cleaning:
1. Start the machine.
2. Disconnect the hose from the suction casing.
3. Put the free end of the suction hose over the left
handle. Push it towards the stop plate.
4. Open the fi lter cleaning port with a quick motion.
Repeat three to six times.
5. Reconnect the hose to the suction casing.

Service

With cleaning and maintenance on the machine, the unit
should be turned off .
Th e fi ne fi lte should be changed at least once per year.
Use only original spare parts. If the machine is used with
a microfi lter/HEPA fi lter, this should be changed every
300 running hours, Use breathing protection when chan-
ging the fi lter. Used fi lters should be sealed in a plastic
sack and disposed of properly.

Accessories

Description
Plastic sack, standard
Fine fi lter cellulose, with
integrated fi lter cover
Microfi lter
Part No
4110
42026
42024
DC 3800 TR S - 10
Th e plastic sack or container should only be changed after
the fi lter has been cleaned. It should be changed when the
dust level is about 5 cm under the foot valve and sealed
after removal from the machine.
Use only original plastic sacks.
Note! Low main pressure and damages in the compres-
sed-air line will result in poor performance.
Th e DC 3800TR S should be performance tested at least
once per year because it may be used with hazardous
materials. Worn parts must be replaced.
Never compromise the function of the DC 3800 TR, use
only original spare parts.
Description
Fine fi lter, polyester,
with integrated fi lter cover 42025
Other accessories — see Dustcontrol catalo-
gue.
Part No
Part No 94113