Description; Operation - Dustcontrol DC 2800a Manual D'instructions

Description

Th e machine should be used for suction and separa-
tion of dried dust. Th e machine fulfi l the demands for
separation of unhealthy dust.
Th e DC 2800a is, despite it's compact size, a full capa-
city Dustcontrol machine. It is stable, tough and reliable
and particularly suited to spot extraction in many dif-
ferent applications ie: welding, grinding, sanding and
cleanup with the 38 mm program.

Operation

Connect the unit to a suitable power source, note re-
quirements on the ID plate. If an extension cord is to
be used, only waterproof cords are acceptable.
Th e DC 2800a is equipped with a fi lter indication lamp
that indicates when the fi lter needs cleaning or chang-
ing. Th e fi lter is generally cleaned once or twice daily
during normal continuous operation. Th e unit must
Th e design is ergonomic and appealing. With a very
low sound level of 70 dB(A) at 1m distance, the
DC 2800a is suitable for use in areas which are sen-sitive
to noise. Th e direct drive two stage high pressure fan is
integrated into the units top. Th e 1200W capacity fan
is double insulated for higher safety.
be in operation to perform fi lter cleaning. Loose the
tube from the suction pipe and press the plastic cage
against the black stop head on the exhaust channel so
that maximum pressure is created in the cyclone.
Open the port on the side of the unit three to six times.
Th is reverse pulse of air cleans the fi lter.
Th e container under the cyclone should be emptied
when it is fi lled to ca 2/3.
DC 2800a - 9 Art nr 9454