2 Safety
Safety instructions for use of electrical devices
► Please read all the instructions before using this device.
► Keep hair, loose clothing, fingers and all body parts away from the openings and movable parts.
Improper use or connection can result in life-threating electric shock or fire. This may result in serious injuries.
► Use the device according to its designated use only.
► Only use manufacturer-approved component parts.
► Check all live cables and connections for proper installation and damage.
► If the device does not function correctly, was dropped or damaged, is left outdoors or fell into water,
have it checked by an authorized specialist store.
► Do not touch the device with wet hands.
► Do not insert any objects into the device's openings.
► Do not use the device if an opening is blocked.
► Keep the device free of dust, fluff, hair and anything that could impair the flow of air.
Safety instructions for electrical components
► Check electric tools for damage and for its proper functioning in accordance with its designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
Safety instructions for welding
► Arc welding may cause damage to the eyes, skin and hearing. Note that other hazards may arise when
the device is used with other welding components. Therefore, always wear the prescribed personal
protective equipment as defined by local regulations.
► Any metal vapors, especially lead, cadmium, copper and beryllium are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the current occupational exposure limits (OEL).
► To prevent the formation of phosgene gas, rinse workpieces that have been degreased with chlorinated
solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity of the
welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in the
workplace.
Safety instructions for personal protective equipment
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves, and a respiratory mask, if necessary.
EN - 6
xFUME™ FLEX