MRA 4025066161249 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
1 Brackets, 1 pair
4 Rubber nuts, M5
6 Plastic washers, 12 x 5 mm
6 Oval head screws, black, M5 x 16mm
1 Covering strip
2 Allen screws, M6 x 60 mm
2 Washers, 12 x 6 x 1 mm
2 Caps, black, M6
2 Bushings, 10.5 x 32.0 mm
2 Spacers, 22 mm
How to mount the screen onto your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen (P1).
! Make sure that you do not lose the springs in the adjustable mounts!
3. Fasten the brackets onto the MRA Varioscreen using the M5 x 16 mm screws, plastic washers and
rubber nuts (P2).
4. Position the covering strip between the headlight and the front mounting point (P3).
5. Position the fairing screen and fasten it to the original mount at the front using the M5 x 16 mm
screws and plastic washers.
6. Fasten the side mount using the M6 x 60 mm screws, washers, the two bushings and the original
springs (P4 and P5).
7. Turn the original cap nuts 3-4 turns to secure them on the screws (P4).
8. Place the caps onto the heads of the Allen screws (P5).
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Triumph Tiger 800/XRX/XRT
Article No..
--- Allen keys, 3 mm, 5 mm
Box spanners, 8 mm, 10 mm
11263
10629
10635
10554
10794
11288
10559
10548
11277
11273
2
Required tools