Table des Matières
Publicité
- Go slow on slippery surfaces.
- Do not operate on inclines that exceed 2 %.
- Do not use machine to transport people or
objects.
- Wear a dust mask, protective glasses and
gloves in dusty environments.
- Keep hands away from spinning brush.
- Use caution when lifting full hopper to avoid
back strain.
- Wear heavy gloves when removing sharp
objects from hopper.
- Turn machine power off if brush becomes
obstructed or machine malfunctions.
4. Before leaving or servicing machine:
- Stop on level surface.
- Turn machine power off and remove key.
5. When servicing machine:
- Turn machine power off and remove key.
- Disconnect battery cable and charger cord
before working on machine.
- Wear protective gloves and glasses when
handling batteries or battery cables.
- Avoid contact with battery acid.
- Use manufacturer supplied or approved
replacement parts.
- All repairs must be performed by a qualified
service person.
- Avoid moving parts. Do not wear loose clothing
or jewelry and secure long hair.
- Do not power spray or hose off machine near
electrical components.
- Do not modify the machine from its original
design.
- Drive wheels off ground during test after drive
belt adjustment.
- All work must be done having enough visibility
and/or appropriate lighting.
- Wear personal protective equipment as needed.
6. When transporting machine:
- Turn machine power off and remove key.
- Get assistance when lifting machine.
- Use a loading ramp that will support the weight
of the machine.
- Do not wheel up or down stairs.
- Use tie-down straps to secure machine when
transporting by vehicle.
Onboard Battery Charger Information
The onboard battery charger's charging profile is
specifically configured for a 12V sealed GEL battery.
When installing a replacement battery it is important to
use the same battery type or damage to the battery
and/or charger may result.
For battery charger operating instructions, refer to the
battery charger manual supplied with the machine.
Tennant S9 (01-2016)
Safety Label
The safety label appears on the machine in the location
indicated. Replace label if missing, damaged or illegible.
English
EN
3
Publicité
Table des Matières
