IFM Electronic ecomat200 DL2003 Notice D'utilisation page 31

Different system parameters are available depending on the selected mode (MOD):
• 1CH and 2CH mode; to detect, display and monitor 1 or 2 independent and
possibly different process values (see page 24, Principle).
• Comparator mode; for differential monitoring or formation of the total of 2
physically identical process values (see page 25, Principle).
Comparator mode (A-B, A+B)
RUN
mode
Indication
of either
actual value
input 1
[∆ bar, ...]
actual value
input 2
[∆ bar, ...]
A-B
A+B
[∆ bar, ...]
actual value
output 3
[∆ bar, ...]
unit
adjustable
Parameter range
system
parameters
application
parameters
and PRG mode
AL-3
MONITOR
see
also
page
62
back
to the
RUN
mode
*) valid for both
inputs
31