AL-3
MONITOR
7. Navigation and parameter description
The
/ -buttons and the
acknowledgement within the parameters arranged in columns.
The parameters above
meters. They are normally set only once during commissioning depending on the
machines or systems to be monitored.
The parameters below these entries are application parameters. They can be set or
changed more often.
1CH and 2CH mode
RUN
mode
Indication
of either
actual value
input 1
[°C, ...]
actual value
input 2
[°C, ...]
actual value
output 3
[°C, ...]
unit
adjustable
30
-button are used for the selection, entry of values and
,
,
system
parameters
application
parameters
and
are general system para-
Parameter range
and PRG mode
see
also
page
61
back
to the
RUN
mode
*) only visible in
the 2CH mode