3M BPEO Taille 0 Instructions De Montage page 8

11.1.2. Mechanical splices FIBRLOK
Install the mechanical splices as per company practices. Please refer to the relevant instruction.
In order to accommodate up to 6 mechanical splices in the tray, you must remove
the pre cut part of the tray cover of the 5mm thick splice tray
(As shown on drawing 30).
Pic 31: Wrong position of the mechanical splice.
Pic 32: Mechanical splice well positioned.
Pic 28: 5mm thick tray for 6 mechanical splices FIBRLOK
28
11.2. 10mm thick splice tray (2 pitches)
Tray WITHOUT storage for optical splitter (Pic 33):
Splices holder is not removable
10mm thick tray for 12 mechanical splices FIBRLOK
10mm thick tray for 12 mechanical splices FIBRLOK
(Mechanical and fusion splices can be mixed. (Pic 36)
Tray WITH provision for optical splitters (Pic 34-35-37).
Splice holder is removable (see § 10.2.4).
1. Splice tray for 10ea Fibrlok 2540G or 10ea heat shrink fusion splices in stacked configuration plus 1ea PLC splitter
10x6x60 mm (Pic 34).
2.Splice tray for 12ea heat shrink fusion splices arranged in 2 levels of 6 splices plus 1ea PLC splitter 10x6x60 mm (Pic 35).
3.Splice tray for 24ea heat shrink fusion splices arranged in 3 levels of 8 splices plus 1ea PLC splitter 10x6x60 mm (Pic 37)
33
11.2.1. Example of PLC splitters installation
Splitter
38
TM ref 2540G
34
39
TM réf 2540G in a row.
31
TM
ref 2540G arranged in 2 levels of 6 splices (Pic 33).
TM and / or fusion splices arranged in 2 levels of 6 splices
35 36
Splitter
8
30
32
37
Splitter
40