3M BPEO Taille 0 Instructions De Montage page 10

Check, that the guiding pins are properly inside of their corresponding slots on the front and the rear of the closure.
Push the dome of the closure down in order to "click" the latches completely.
2 - Correct insertion of the
large guiding parts.
3 - Insertion of the small
guiding parts.
Check
Secure the left latch
Secure the right latch
13. Tightness test
Pressurize the closure to 200 mbar max for the time of the test.
Detect potential leakages using an appropriate leakages detection product
(Not shown).
10