3M BPEO Taille 0 Instructions De Montage page 6

9.3. Fiber routes inside the splicing tray
Fan out the fibers in the tray entering
from the right port or from the left port of
the splicing tray (Pic 23-24).
To route fiber from one tray to another, there are two possible routes depending on the necessity to use the entry port on
the same side or on the opposite side.
Same side ports
10. Preparing and Installing Mechanical Cable Entries ECAM S7 and S9,5
Please follow the below recommended ECAM port installation order (from 1 to 6 on each side of the closure).
23
6
5
3
2
1
25
Splicing Tray
4
6
24
RIGHT Port
LEFT Port
Opposite side