Dust Emissions Into The Environment; General Recommendations; Description Of The Vacuum Cleaner - Labels - Nilfisk ALTO ATTIX 130 Notice D'utilisation

- Dust emissions into the environment

Indicative values of performance:
- normal version (not suitable for vacuuming hazardous
dusts): retains at least 99,1% of the particles measuring
> = 3 micrometers;
- version for dusts hazardous for the health
(Classes L - M - H):
L, retains at least 99,1 % of the particles measuring >
= 3 micrometers;
M, retains at least 99,9 % of the particles measuring >
= 3 micrometers;
H, class H14 Hepa filter in accordance with EN
1822.

- General recommendations

ATTENTION DANGER !
- Risk of fire outbreaks and explosions.
The vacuum cleaner can only be used when it is
certain that active sources of ignition are not going
to be vacuumed.
It is forbidden to vacuum the following materials:
burning materials (embers, hot ashes, lighted ciga-
rettes, etc.), flammable liquids, aggressive fuels (e.g.
gasoline, solvents, acids, alkaline solutions, etc.).
It is forbidden to vacuum the following materials:
explosive dusts or ones liable to ignite in a spon-
taneous way (such as magnesium or aluminium
dusts, etc.).
The vacuum cleaner is not suitable for vacuuming
explosive or similar substances, as established by
the laws governing explosive substances, particu-
larly: liquid fuels and mixtures of flammable dusts
and liquids.
ATTENTION DANGER !
Emergency
If an emergency situation occurs:
- filter breakage
- fire outbreak;
- short-circuit;
- motor block;
- electric shock;
- etc.;
turn off the vacuum cleaner, unplug it and ask for
assistance from specialized personnel.
Note
Check the place of work and substances tolerated for
the vacuum cleaner in version for liquids.
07/2008
ATTENTION DANGER !
The vacuum cleaners must not be used or stored
outdoors, or in damp places.
Only versions with the level sensor can be used for
liquids.
If not, they can only be used to vacuum dry mate-
rials.
ATTENTION DANGER !
Version for liquids.
If foam or liquid spills from the machine, switch off
immediately and check for the cause.

- Description of the vacuum cleaner - Labels

See fig. 1.
- Labels key of fig. 1
A - Identification plate
Code of the Model which includes the Category
of use (L - M - H), Technical Specifications, Serial
Number, CE marking, Year of manufacture
B - Dust container
C - Fastening latches
D - Handle
E - Inlet
F - Inlet plug (only for Class M - H vacuum cleaners)
G - Warning label (only for Class L - M - H vacuum
cleaners)
H - Exhaust
I - Attention plate
Draws the operator's attention to the fact that the
filter must only be shaken when the machine is off
(see par. "Shaking the main filter").
L - Panel power plate
Indicates that the panel is powered by the voltage
given on the data plate.
M - Socket
Socket on the machine, electrical equipment connec-
tion via the dedicated socket located on the control
panel.
- Switch off the vacuum cleaner before connecting an
electrical equipment/tool via the socket.
- If tools are connected via the machine socket, make
sure that they are switched off when plugging in.
3
ATTIX 130
GB
C319