Dust Emissions Into The Environment; General Recommendations; Description Of The Vacuum Cleaner - Labels - Nilfisk 127 Manuel D'instructions

-

Dust emissions into the environment

Indicative values of performance:
- normal version (not suitable for vacuuming hazardous
dusts): retains at least 99.1% of the particles measuring
> = 3 micrometers;
- version for dusts hazardous for the health
(Classes L - M - H):
L, retains at least 99.1% of the particles measuring ≥ 3
micrometers;
M, retains at least 99.9% of the particles measuring ≥
3 micrometers;
H, class H14 Hepa filter in accordance with EN 1822.
-

General recommendations

ATTENTION DANGER !
Risk of fire outbreaks and explosions.
The vacuum cleaner can only be used when it is cer-
tain that active sources of ignition are not going to be
vacuumed.
It is forbidden to vacuum the following materials: burn-
ing materials (embers, hot ashes, lighted cigarettes,
etc.), flammable liquids, aggressive fuels (e.g. gasoline,
solvents, acids, alkaline solutions, etc.).
It is forbidden to vacuum the following materials: explo-
sive dusts or ones liable to ignite in a spontaneous way
(such as magnesium or aluminium dusts, etc.).
The vacuum cleaner is not suitable for vacuuming
explosive or similar substances, as established by the
laws governing explosive substances, particularly: liquid
fuels and mixtures of flammable dusts and liquids.
ATTENTION DANGER !
Emergency
If an emergency situation occurs:
- filter breakage
- fire outbreak;
- short-circuit;
- motor block;
- electric shock;
- etc.;
turn off the vacuum cleaner, unplug it and ask for as-
sistance from specialized personnel.
09/2008
Note
Check the place of work and substances tolerated for the
vacuum cleaner in version for liquids.
ATTENTION DANGER !
The vacuum cleaners must not be used or stored out-
doors, or in damp places.
Only versions with the level sensor can be used for
liquids.
If not, they can only be used to vacuum dry materials.
ATTENTION DANGER !
Version for liquids.
If foam or liquid spills from the machine, switch off im-
mediately and check for the cause.
-

Description of the vacuum cleaner - Labels

See fig. 1.
- Labels key of fig. 1
A- Identification plate
Code of the Model which includes the Category of use
(L - M - H), Technical Specifications, Serial Number, CE
marking, Year of manufacture
B- Dust container
C- Fastening latches
D- Handle
E- Inlet
F- Inlet plug (only for Class M - H vacuum cleaners)
G- Warning label (only for Class L - M - H vacuum clean-
ers)
H- Exhaust
I- Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the machine is off (see par.
"Shaking the main filter").
L- Panel power plate
Indicates that the panel is powered by the voltage given
on the data plate.
M- Socket
Socket on the machine, electrical equipment connection
via the dedicated socket located on the control panel.
- Switch off the vacuum cleaner before connecting an
electrical equipment/tool via the socket.
- If tools are connected via the machine socket, make
sure that they are switched off when plugging in.
3
127 / 137
I
GB
F
D
E
C72