Wireless hand-held microphone
These instructions are intended for users with
out any specific technical knowledge . Please
read these instructions carefully prior to oper
ating the unit and keep them for later refer
ence .
All operating elements de scribed can be
found on the foldout page 3 .
1 Overview
1.1 Fig. 1: Hand-held microphone
1 Microphone cartridge; to insert batteries,
unscrew the cartridge (figs . 2 to 4)
2 LC display; indicates the transmission fre
quency and the charging status of the bat
teries during operation
3 Cap for the control part; remove the cap for
operation (fig . 5)
4 Power switch
1.2 Figs. 2 to 4: Inserting batteries
(microphone cartridge unscrewed)
5 4pole contact, each on the microphone
cartridge (fig . 2) and on the handle (fig . 3);
prior to assembling microphone cartridge
and handle, fit the contacts together
6 Lock for the battery holder (7);
to unlock the holder, press the lock in arrow
direction backwards
7 Battery holder for two 1 .5 V batteries of
size AA (R6)
1.3 Fig. 5: Control part
(cap removed)
8 Key SET
with the unit not locked:
for calling up and exiting the adjusting
modes for frequency/sensitivity/ lock func
tion
chapters 5 .1, 5 .2 and 5 .3 .1
☞
with the unit locked:
for calling up and exiting the adjusting
mode for the lock function
5 .3 .2
9 Key for reducing the frequency (in the
frequency adjusting mode) or the sensitivity
(in the sensitivity adjusting mode) and for
deactivating the lock function (in the lock
mode)
10 Key for increasing the frequency (in the
frequency adjusting mode) or the sensitiv
ity (in the sensitivity adjusting mode) and
for activating the lock function (in the lock
mode)
2 Important Notes
This unit corresponds to all relevant directives
of the EU and is therefore marked with
•
The unit is suitable for indoor use only . Pro
tect it against dripping water and splash wa
ter, high air humidity and heat (admissible
ambient temperature range 0 – 40 °C) .
•
For cleaning only use a dry, soft cloth, never
use chemicals or water .
•
No guarantee claims for the unit and no lia
bility for any resulting personal damage or
material damage will be accepted if the unit
is used for other purposes than originally
intend ed, if it is not correctly operated or if
it is not re paired in an expert way .
3 Applications
In combination with the multifrequency receiv
er TXS871 from IMG STAGELINE, this dynamic
handheld microphone with integrated multi
frequency transmitter makes up a wireless
audio transmission system . Within the UHF
frequency range of 863 – 865 MHz, the trans
mission frequency can be selected from 15 fre
quencies (frequency spacing 125 kHz) .
The microphone is supplied with a micro
phone case, a microphone holder and 7 plastic
pushon caps of different colours .
3.1 Approval of the wireless microphone
chapter
☞
Herewith, MONACOR INTERNATIONAL de
clare that the wireless microphone TXS871HT
complies with the directive 2014 / 53 / EU . The
EU declaration of conformity is available on
request from MONACOR INTERNATIONAL .
The wireless microphone is licence-free and
requieres no registration.
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
.
7