Care And Maintenance - topmark JAIMY T7070 Mode D'emploi

CARE AND MAINTENANCE

To prolong the life of your nursery product, keep it clean and do not leave in the
direct sunlight for extended periods of time.
Check the wheels regularly for wear and make sure that there is no dust and sand
between the axles and wheels.
Metal and plastic surface may be cleaned using warm water with a household soap
or a mild detergent. Allow it to dry fully, preferably away from direct sunlight.
Do not allow this product to come outside, sand causes corrosion on wheels and may
cause damages on a parquets-, laminate-, linoleum– or carpet floor.
Helpful hints
EN
If the wheels squeak, use a silicon based spray ensuring it penetrates the wheel and
axles assembly.
Do not dry clean or use bleach.
Do not machine wash, tumble or spin dry, unless the care labelling on the product
permits these methods.
The fabric coating is 100% PVC. Changing pad may be cleaned using a damp sponge
with soap or mild detergent. Allow it to dry completely before folding or storing it
away.
In some climates the parts may be affected by mould and mildew. To help prevent
this occurring, do not fold or store the product if it is damp or wet. Always store the
product in a well ventilated area.
Always check parts regularly for tightness of screws, nuts and other fasteners, tight-
en if required. To maintain the safety of your nursery product, seek prompt repairs
for bent, torn, worn or broken parts.
Use only parts and accessories approved by the supplier.
20