Care And Maintenance - topmark XAVI T6080 Mode D'emploi

CARE AND MAINTENANCE

To prolong the life of your nursery product, keep it clean and do not leave in the
direct sunlight for extended periods of time.
Do not use abrasive cleaners. Do not soak in water. The chassis may be cleaned
using warm water with a household soap or a mild detergent. Allow it to dry fully,
preferably away from direct sunlight.
Keep it away from rain or water and a very hot or dusty environment, it can
damage the circuit board.
Always store your product in a clean dry place.
Do not leave in the boot of car.
Excessive exposure to sunlight and/ or strong heat will make the plastic parts age
EN
and colours will fade.
Should parts become stiff, squeak or difficult to operate ensure dirt is not the cause.
When storing high chair swing, never stack other items on top of it, this may damage
the high chair swing.
Do not dry clean or use bleach.
Do not machine wash, tumble or spin dry, unless the care labelling on the product
permits these methods.
The fabric coating is 100% PU. Inlay may be wiped with soap or mild detergent and
rinsed with warm water. Allow it to dry completely before folding or storing it away.
In some climates the parts may be affected by mould and mildew. To help prevent
this occurring, do not fold or store the product if it is damp or wet. Always store the
product in a well ventilated area.
Always check parts regularly for tightness of screws, nuts and other fasteners,
tighten if required. To maintain the safety of your nursery product, seek prompt
repairs for bent, torn, worn or broken parts.
Use only parts and accessories approved by the supplier.
40