Phase Mode; Standard Operating Mode; Quick Phase Shift - SKF TKRS 21 Mode D'emploi

4.4 Phase mode

The phase mode allows to rotate the frozen image while keeping the same
lash rate.
Changing the phase is very helpful for inspections as all parts of the machine
can be inspected without changing the lash rate.
Rotating the wheel (button 3) changes the phase.

4.4.1 Standard operating mode

Adjust phase by scrolling the wheel
Fig. 13 – Phase by TKRS 21

4.4.2 Quick phase shift

The buttons 1 and 2 can be used to quickly change the phase by + / - 45°.
18 EN